Concrete Wolf Laser Screed
Concrete Wolf Laser Screed
Concrete Wolf Laser Screed specification
Concrete Wolf Laser Screed specification
Delivery contains Vibration Laser Screed device and laser receivers.
Additionally 1 or 2 LiFePo 12V batteries with dimensions of 10x10x15cm, along with a battery charger are needed. To operate the device, a rotary laser and a measuring tape are also required.
No extensive experience is needed for operating the device. Familiarizing yourself with the manual and instructions is sufficient for usage.
We recommend conducting the initial trial and familiarization during the leveling of the concrete floor sub-base. Concrete floor sand layer leveling.
The device comes with an assembly guide. Upon arrival, the device requires simple assembly. For assembly, only wrenches and hex keys are required.
It is recommended to use one battery.
One battery is enough for up to 4-8 hours or 1000-2000m2 of concrete leveling. About 20 minutes of charging is enough for 2-4 hours of work. With one battery the device is lighter.
Lead-acid batteries can be used, but then the device will weigh significantly more and there may be issues when smoothing wetter concrete.
The device is designed for use in construction. It can be used both indoors and outdoors.
To purchase the device, you need to place an order for the device on the Concrete Wolf webpage. Payment is made through the internet banking payment center. You can also make the payment using PayPal payment platform.
If credit card payment is not available, please send us an email with the client’s requisites and shipping address. We will then send you an invoice, and after payment, we will ship the device to you.
A reliable DHL courier will deliver it to your desired location.
In case of device malfunction, please send a description of the fault to info@concretewolf.eu or call +372-6005588.
We recommend sending some photos or a short video of the device malfunction or making a video call. We will provide instructions for troubleshooting. If the issue cannot be resolved, then:
Delivery contains Vibration Laser Screed device and laser receivers.
Additionally 1 or 2 LiFePo 12V batteries with dimensions of 10x10x15cm, along with a battery charger are needed. To operate the device, a rotary laser and a measuring tape are also required.
It is recommended to use one battery.
One battery is enough for up to 4-8 hours or 1000-2000m2 of concrete leveling. About 20 minutes of charging is enough for 2-4 hours of work. With one battery the device is lighter.
Lead-acid batteries can be used, but then the device will weigh significantly more and there may be issues when smoothing wetter concrete.
The device comes with an assembly guide. Upon arrival, the device requires simple assembly. For assembly, only wrenches and hex keys are required.
No extensive experience is needed for operating the device. Familiarizing yourself with the manual and instructions is sufficient for usage.
We recommend conducting the initial trial and familiarization during the leveling of the concrete floor sub-base. Concrete floor sand layer leveling.
The device is designed for use in construction. It can be used both indoors and outdoors.
To purchase the device, you need to place an order for the device on the Concrete Wolf webpage. Payment is made through the internet banking payment center. A reliable DHL courier will deliver it to your desired location.
In case of device malfunction, please send a description of the fault to info@concretewolf.eu or call +372-5550-5550.
We recommend sending some photos or a short video of the device malfunction or making a video call. We will provide instructions for troubleshooting. If the issue cannot be resolved, then:
Delivery contains Vibration Laser Screed device and laser receivers.
Additionally 1 or 2 LiFePo 12V batteries with dimensions of 10x10x15cm, along with a battery charger are needed. To operate the device, a rotary laser and a measuring tape are also required.
It is recommended to use one battery.
One battery is enough for up to 4-8 hours or 1000-2000m2 of concrete leveling. About 20 minutes of charging is enough for 2-4 hours of work. With one battery the device is lighter.
Lead-acid batteries can be used, but then the device will weigh significantly more and there may be issues when smoothing wetter concrete.
The device comes with an assembly guide. Upon arrival, the device requires simple assembly. For assembly, only wrenches and hex keys are required.
No extensive experience is needed for operating the device. Familiarizing yourself with the manual and instructions is sufficient for usage.
We recommend conducting the initial trial and familiarization during the leveling of the concrete floor sub-base. Concrete floor sand layer leveling.
The device is designed for use in construction. It can be used both indoors and outdoors.
To purchase the device, you need to place an order for the device on the Concrete Wolf webpage. Payment is made through the internet banking payment center. A reliable DHL courier will deliver it to your desired location.
In case of device malfunction, please send a description of the fault to info@concretewolf.eu or call +372-5550-5550.
We recommend sending some photos or a short video of the device malfunction or making a video call. We will provide instructions for troubleshooting. If the issue cannot be resolved, then:
© 2024 Concrete Wolf. All rights reserved.
